Manual - Chapter 2 Clutch

Specifications

Clutch friction plate
Diameter:
75 models 165 ± 1 mm (6.50 ± 0.04 in)
100 models 185 ± 1 mm (7.09 ± 0.04 in)
Thickness:
Standard 5,05 - 5,55 mm (0.1988 - 0.2185 in)
Service limit 4,50 mm (0.1772 in)
Torque wrench settings
75 models 100 models
Component Nm lbf ft Nm lbf ft
Clutch housing/engine output shaft retaining nut:
1st stage 140 ± 5 103 ± 4 140 103
2nd stage - release, then tighten to N/App N/App 90 - 114 66 - 84
Cover plate/housing bolts or screws 19 ± 2 14 ± 1.5 21 15.5

 

Next Section: General description